+8613906047998
Description
Overview of FLS 09 UV-5 R2 UV Flame Scanner
The Saacke FLS 09 UV 5 R2 UV Flame Scanner Sensor is a high – performance flame detection device, which is characterized by high sensitivity, fast response and strong anti – interference ability. FLS 09 UV-5 R2 is mainly used in the flame detection of industrial combustion equipment to ensure production safety.
Uses
- Narrow – band spectral response: FLS 09 UV-5 R2 UV flame scanner adopts a high – sensitivity ultraviolet phototube, which only responds to the ultraviolet light in the narrow wavelength range of 185 – 260nm generated during flame combustion. It is insensitive to ultraviolet light in other spectral ranges, as well as sunlight, lighting, high – temperature radiation in the furnace, etc., which can effectively avoid external interference and accurately detect the flame.
- Fast response speed: The high – sensitivity ultraviolet phototube enables the FLS 09 UV-5 R2 sensor to detect the appearance or extinction of the flame in a very short time, with a detection response time of ≤0.2 seconds, which can promptly protect the safety of the system.
- High protection level: The FLS 09 UV-5 R2 UV flame detecting sensor has an IP65 protection level, which can effectively prevent dust and water from entering, and is suitable for use in various harsh industrial environments.
- Lightweight and easy to install: FLS 09 UV-5 R2 weighs only 430 grams. Its lightweight design makes it easy to install in a variety of settings, reducing the difficulty and cost of installation.
Uniqueness
- Flame detection of gas – fired and oil – fired furnaces: FLS 09 UV-5 R2 is widely used in the flame detection of various gas – fired and oil – fired furnaces in petrochemical, metallurgy, coal chemical, ceramics and other industries, such as gas burners, industrial furnace burners, ladle dryers, etc., to ensure the stable operation of the combustion system. When the flame is abnormal or extinguished, FLS 09 UV-5 R2 flame sensor can promptly send a signal to preven safety accidents caused by unburned gas accumulation
- Torch flame detection: FLS 09 UV-5 R2 UV flame detector can also be used for the flame detection of torches, which is of great significance for the safe operation of industrial production processes, and can timely detect the combustion status of torches to ensure the normal discharge of waste gas and the safety of the production environment.
